United Public Domain Gold 2/United Public Domain Gold 2.iso/utilities/pu450.dms/pu450.adf/doc/dmake.doc

Text File | 2014-06-18 | 11KB | 386 lines

                 DMAKE.DOC

              RELEASE V1.0 3-Feb-1989

    DMake (c)Copyright 1989 by Matthew Dillon, All Rights Reserved

    Matthew Dillon
    891 Regal Rd.
    Berkeley, Ca. 94708
    USA

    [e-mail]
    ..!ucbvax!dillon

    You MUST be familar with 'make' to understand these instructions.
    Please read the bug list at the end.

    The default file is 'DMakefile'.  Options are:

    -a            force all time comparisons to fail
    -f filename        use this instead of DMakefile
    -n            don't actually execute the lines
    -v    (debugging, have fun)
    -d    (debugging, have lots of fun)
    -s            silent .. don't display startup copyright notice


                CONTROL FILE

    The control file, DMakefile by default, is made up of macros,
    dependancies, and comments.  A macro looks like this:

    <macroname> = <string>
    CFLAGS = +L

    A dependancy looks like this:  Note that commands may have an
    optional '-' in front of them telling DMake to ignore the exit
    code.

    <left1> <left2> <left3> .. : <right1> <right2> <right3>
        [-]<command>
        [-]<command>
    blank-line

    a.o b.o c.o : a.c b.c c.c
        cc $(CFLAGS) %(right) -o %(left)
        Echo "hi!"

    d.o e.o f.o : d.x e.x f.x
        ...

    Any line may be 'continued' onto the next line by specifying a backslash
    at the end of the line:

    a.o b.o c.o : \
    a.c b.c c.c
    Echo "ha %(left) %(right)"
    #    Echo "this line commented out"

    Any line my be commented out with a # at the beginning (The hash must
    occur at the beginning of a line and will not work in the middle of
    a continued line).

    #    This is a comment

              SPECIFICATIONS OF DEPENDANCIES

    A dependancy consists of one or more left-hand-sides and zero or more
    right-hand-sides.  Each element on the left is matched to an associated
    element on the right singly.  that is:

    a.o b.o c.o : a.c b.c c.c
        <cmdlist>

    Is equivalent to:

    a.o : a.c
        <cmdlist>

    b.o : b.c
        <cmdlist>

    c.o : c.c
        <cmdlist>

    Extra elements on the left are disallowed except for the special case
    where there are NO elements on the right (i.e.  all :   ).  Each extra
    element on the right is applied to EVERY element on the left.  That is:

    a.o b.o c.o : a.c b.c c.c x.h y.h
        <cmdlist>

    is equivalent to:

    a.o : a.c x.h y.h
        <cmdlist>

    b.o : b.c x.h y.h
        <cmdlist>

    ...

               WILDCARDS IN SPECIFICATION

    You may specify wildcards for dependancies:

    *.o x.o y.o : *.c x.q y.q
        <cmdlist>

    equivalent to:
    *.o : *.c
        <cmdlist>

    x.o : x.q
        <cmdlist>

    y.o : y.q
        <cmdlist>

    expanded to: (assume a.c, b.c, and c.c exist).  Note that the .o's are
    not scanned for, just the .c's, and then a reverse mapping is applied
    to generate the .o's.  For this reason, any *'s and ?'s in the right
    hand side wildcard must have associated *'s and ?'s in the left hand
    side wildcard.

    a.o : a.c
        <cmdlist>

    b.o : b.c
        <cmdlist>

    c.o : c.c
        <cmdlist>

    ...


    When these dependancies are executed by DMake, each right hand side
    wildcard will be directory-scanned for and the associated left hand
    side wildcard will be GENERATED.  THE LEFT HAND SIDE WILDCARD IS NOT
    SEARCHED FOR BY A DIRECTORY SCAN, BUT GENERATED FROM THE RESULTS OF THE
    RIGHT HAND SIDE.  There are several exceptions to the general case
    mentioned above:

    <nonwildcard> : <wildcard>        Right hand side expanded and results
                    all applied to the left hand side element.

    all : *.c   ->    all : a.c b.c c.c

    <wildcard> : <nonwildcard>        Left hand side expanded (the only time
                    the left hand side is ever expanded,
                    and then only if there is no right hand
                    side in that wildcard) and the results
                    applied to the right hand side element.

    *.c : syms  -> a.c : syms, b.c : syms, c.c : syms

    To be more specific, the moment some wildcard is expanded, ALL other
    occurances of that wildcard will be expanded.


                 MACROS AND COLLECTIONS

    Macros are referenced like this:  $(MACNAME).  Usage is straight
    forward.  Note that ENV: will be searched if a macro name could not
    be found otherwise.

    Collections are a different matter entirely.  Collections are a means
    of accessing the left hand side and elements in the right hand side of
    dependancies at command-execution time.  A collection reference is
    specified with a % instead of a $.    There are two predefined collection
    variables called %(left) and %(right).  %(left) references the left
    hand side (there is always only one element on the left hand side), and
    %(right) references the right hand side:

    all : *.o symbols libs
    Echo %(left)                Echo all
    Echo "%(right)"             Echo "a.o b.o c.o symbols libs"

    Individual wildcarded elements on the right can be referenced in the
    same way:

    Echo "%(*.o)"               Echo "a.o b.o c.o"

    Additionaly, you can specify a collection reference wildcard and if
    that collection doesn't exist under that exact wildcard, the entire
    right hand side collection will be searched for elements that match the
    wildcard:

    a.o b.o c.o : a.c b.c c.c *.h
        Echo "%(right)"
        cc %(*.c) -o %(left)

    Results in (at execution time):

    Echo "a.c x.h y.h"
    cc a.c -o a.o
    Echo "b.c x.h y.h"
    cc b.c -o b.o
    Echo "c.c x.h y.h"
    cc c.c -o c.o

    Unlike the ALL: line in the previous example, where *.o was an actual
    collection variable, here *.c is NOT a collection variable (unless you
    had specified *.o : *.c, which you didn't), so the right hand side
    is searched for elements matching the wildcard.

    Now pay careful attention:

    SRCS = *.c
    OBJS = T:*.o

    all: $(OBJS)
        ln %(OBJS) -o executable        (ln a.o b.o c.o -o executable)
        Echo "$(OBJS)"                  (Echo "*.o"                  )
        Echo "%(OBJS)"                  (Echo "a.o b.o c.o"          )

    $(OBJS): $(SRCS)
        cc %(right) -o %(left)

    Note that $(MacName) results in the exact macro string, wildcard or not,
    while %(MacName) find the macro and then finds the collection associated
    with the macro's name.

            MULTIPLE DEPENDANCIES W/ SAME LEFT HAND SIDE

    all: *.o
        ln %(*.o) -o executable

    *.o : *.c
        cc $(CFLAGS) %(right) -o %(left)

    *.o : *.asm
        as $(CFLAGS) %(right) -o %(left)

    Now, recall that the right hand side wildcards are scanned for and the
    left hand side generated.

    *.o : *.c  -> the .C's are scanned for, say, a.c b.c c.c, and
          a.o b.o c.o are placed in the *.o collection

    *.o : *.asm -> the .ASM's are scanned for, say, i.asm j.asm, and
          i.o j.o are placed in the *.o collection

    all: *.o    -> The *.o's are NOT scanned for because they have already
          been generated by the other two dependancies.  The
          collection consists of:

          a.o b.o c.o i.o j.o

    The fact that the left hand side is not scanned for except for the
    case <wildcard> : <nonwildcard>, plus the fact that any wildcard
    that is already a collection (*.o in the above example) will not be
    scanned for (all : *.o in the above example) has many advantages, the
    least of which is that DMake will not get confused by extra object files
    in whatever directory you choose to place the objects.


              VARIABLE MODIFICATION

    Both macro and collection specs may be modified with a reference of
    the following form:

    %/$(NAME:"srcwc":"destwc")

    SRCS = a.c b.c c.c            -> a.c b.c c.c
    OBJS = $(SRCS:"*.c":"ram:*.o")      -> ram:a.o ram:b.o ram:c.o

    SRCPAT = *.c
    DSTPAT = ram:*.o
    OBJS = $(SRCS:"$(SRCPAT)":"$(DSTPAT)")      (equivalent)

    SRCPAT = "*.c"
    DSTPAT = "ram:*.o"
    OBJS = $(SRCS:$(SRCPAT):$(DSTPAT))          (equivalent)

    CONVPAT = "*.c":"ram:*.o"
    OBJS = $(SRCS:$(CONVPAT))                   (equivalent)

    Whether you use % or $ depends on whether you want an explicit
    replacement or a collection replacement.  Again, refer to a
    couple of examples back where we had:

    all: $(OBJS)            -> all: *.o
        ln %(OBJS)          -> ln %(*.o) -> ln a.o b.o c.o


                ORDER OF EXECUTION

    Execution order is based on precedence.  Theoretically a Depth-First
    order beginning at the leaf of each tree and then running backwards.
    If you have :

    all: symbols $(OBJS)

    Dependancies associated with 'symbols' will be executed before those
    associated with $(OBJS).  Directory-Searching for wildcards in
    dependancies is done in execution order as well, so you could easily
    have this:

    all: arced* *.o
        ln %(*.o) -o ram:file

    *.o : *.c
        cc $(CFLAGS) %(right) -o %(left)

    *.o : *.asm
        as $(AFLAGS) %(right) -o %(left)

    #   Note here that arced* is a wildcard dummy.    If we had just
    #   used 'arced', the 'arc' command would have been executed once
    #   with ALL the .arc files as arguments instead of being executed
    #   once for each .arc file.

    arced* : *.arc
        arc x %(*.arc)

    In anycase, the assumption that the arc files may contain .C and .ASM
    files and these will be included in the *.o : *.c and *.o : *.asm
    dependancies is absolutely correct.


                COMMON MISTAKES


    ram:*.o ram:library.o : /dir2/*.c library.c        RIGHT
        cc %(right) -o %(left)

    ram:*.o ram:*.o : /dir2/*.c library.c            WRONG
        cc %(right) -o %(left)

    The dependancy labeled WRONG should be quite apparent if you break it
    up manually:

    ram:*.o : /dir2/*.c
        <commands>

    ram:*.o : library.c
        <commands>

    The problem is the last one ... here you are saying that ALL the object
    files depend on a single source file, which is wrong.


                 COMMAND EXECUTION

    The CD command is an internal command.  Specifying CD with no arguments
    returns you to the initial directory that DMake was run from.  This
    is incredibly useful:

    OBJS = ram:*.o
    SRCS = *.c

    $(EXE): $(OBJS)
        cd ram:
        ln %(right:"ram:*":"*") -lc32 -o $(EXE)
        cd

    $(OBJS): $(SRCS)
        cc %(right) -o %(left)


    Commands are limited to ~200 chars in length (BCPL limitation) when
    executed.  DMake has an internal limit of 4K long command command/
    dependancy lines.

    There are two solutions to the problem.  (1) If your object list isn't
    too big you can use the CD trick to CD into the object directory and
    then remove the directory prefix for the object files on the link line.
    (2) You can use a shell or equivalent and have it generate a file of
    the expanded names, and then use the common -f option for the linker
    (link from file list).

    all: $(OBJS)
        shell -c "echo $(OBJS) >ram:linktmp"
        ln -f ram:linktmp $(LINKLIBS) -o executable
        Delete ram:linktmp

    Note that in running the shell command (dillon/drew shell), I specified
    $(OBJS) instead of %(OBJS) ... passed the shell the explicit wildcard
    instead of the over-long collection list.